Shutter Options Descriptions
Small Tilt Rod:
Can be applied to any louver shutter (with or without mouse holes).
Large Tilt Rod:
Can be applied to any louver shutter (with or without mouseholes).
Mouse Hole Option:
Receiving notch used with large tilt-rod for added authenticity.
Cut Out:
Decorative cutout (choose from any of our standard templates) typically located in the upper panel of any paneled shutter. Please note: extremely narrow shutters (pair widths of 26" or less) may not have enough surface area to accommodate a cut-out.
Template Charge:
A charge to develop a custom template for a cut-out. Please submit a clear drawing or tracing of the desired shape in the approximate desired size. We will submit the completed drawing to you for approval once the template is complete.
Copper Capping:
Upgrade from the standard aluminum.
Overlap Rabbeting:
Milled so that the left-hand shutter will show the exposed side of the rabbet, on the left, when in the open position. We can reverse this upon request to match existing shutters.
Small Beading Detail (1/4" diameter):
If rabbeted, beading detail will be milled on the opposite side of the rabbet unless specified otherwise. If not rabbeted, beading detail will be milled on the left and right stiles of the front of the shutter only (unless otherwise specified).
Large Beading Detail (3/8" diameter):
If rabbeted, beading detail will be milled on the opposite side of the rabbet unless specified otherwise. If not rabbeted, beading detail will be milled on the left and right stiles of the front of the shutter only (unless otherwise specified).
Custom Rail Placements:
A charge for placing a rail in an exact vertical location at a measurement that differs from our standard configurations. Please provide, in inches, the measurement from the top of the shutter to the center-line of each rail. Please note: due to the indexed spacing on louvers, we will need a (+) or (-) of approximately 1/2"- 3/4", (applies to louvered shutters only).
Custom Rail Dimensions:
A charge to match a desired rail width that differs from our standard. Please note: due to the indexed spacing on louvers, we will need a (+) or (-) of approximately 1/2"-3/4", (applies to louvered shutters only).
Custom Stile Dimensions:
A charge to match a desired stile width other than that of our standard.
Hurricane Paneling:
Timberlane Hurricane Paneling provides enhanced protection from high winds. Shipped in rolls to be cut and attached to the outer facing surface of your shutters (when closed), the 0.145" thick reinforced fiberglass membrane has an "impact" design pressure rating of 60 PSF positive and 55 PSF negative. Timberlane Hurricane Paneling complies with SBCCI/Dade County Building Code test protocols PA 201-94, PA 202-94 and PA 203-94.
Below are our standard shutter options and pricing. Please refer to our Finishing Guide on pages 2-4 for availability of the desired option on the shutter style you have selected as not all options are available on all shutter styles. Customizing a Shutter to either replicate an existing shutter, or simply adding features that you want, is not as hard as it might appear. Additionally, it is virtually impossible to list all the available customizations that are available, so if you don't see what you're looking for, there is a good chance we can offer it to you and have already done it; just call one of our Shutter Professionals at: 800-250-2221 for pricing and availability or visit: timberlane.com.
| Shutter Options | |||
|---|---|---|---|
| Option # | Description | Price | |
| Cost | UOM | ||
| 5050 | Overlap Rabbetting | $20.00 | Pair |
| 8650 | Beading- 1/4" (Small) | $20.00 | Pair |
| 8651 | Beading- 3/8" (Large) | $20.00 | Pair |
| 8800 | Custom Rail Placement1 | 10% | Base Cost |
| 8850 | Custom Rail Width1 | 10% | Base Cost |
| 8900 | Custom Stile Width1 | 10% | Base Cost |
| 9175 | Custom Thickness- 1-3/8" to 1-3/4" | 40% | Base Cost |
| 1250 | Tilt Rod- 3/8" (Small) | $25.00 | Pair |
| 1251 | Tilt Rod- 1/2" (Large) | $25.00 | Pair |
| 1300 | Mousehole | $25.00 | Pair |
| 1350 | Cut Out | $35.00 | Pair |
| 1351 | Custom Cut Out Template Charge | $50.00 | One Time |
| 9250 | Flush Back Panel | 20% | Base Cost |
| 1425 | Inside Chase Beading | 50% | Base Cost |
| R1 | Radius Top- Solid | $80 | Pair |
| R2 | Radius Top- Sunburst | $275.00 | Pair |
| R3 | Radius Top-Louvered W/O Shoulder Rail | $240.00 | Pair |
| R3-S | Louvered W/ Shoulder Rail | $240.00 | Pair |
| R5 | Profiled Panel W/O Shoulder Rail | $135.00 | Pair |
| R5-S | Profiled Panel W/Shoulder Rail | $135.00 | Pair |
| R6 | Flat Panel W/O Shoulder Rail | $135.00 | Pair |
| R6-S | Flat Panel W/ Shoulder Rail | $135.00 | Pair |
| RFT | Flex Trim W/O Shoulder Rail | $240.00 | Pair |
| RFT-S | Flex Trim W/ Shoulder Rail | $240.00 | Pair |
| Combo | Combination Shutter | 10% | Base Cost |
1 Custom Rail Dimensions and Widths, and Custom Stile Dimensions are priced as a percentage of the base cost of the shutter regardless of how many rails are required. Please see our Finishing Guide for size limitations.